Home
 
"Precious" Tablet Coating Machine with Mobile Hot Air Blower.
The Coating Pan can be mounted on Motor Drive unit via efficient worm Universal Gear (UG), which permits Coating pan to be held at any angle up to 45° with reduction in speed.
A combined fan & motor unit together with an attached heating unit make up the hot air blower.
Totally enclosed and running in an oil bath.
For drying attachment with adjustable height is provided.
The maximum operational capacity is 30 % of coating pan volume.
The flexible and adjustable air flow pipe allows for suitable positioning in the pan and easy withdrawal for loading or unloading.
The flow of air in this unit is not controlled by the speed of the pan; the hot or cold air can be blown as required.
The coating pan is suitable for screwing on all main drives.
All Precious Coating machines are provided with interlocked electrical circuit so that heaters can be operated only after blowers are made ‘ON’ to avoid burning of heaters.
The warm wheel is made of phosphor bronze and the worm of nickel chrome case-hardened steel with accurately ground thread profile. All shafts are mounted on ball bearing of ample capacity to take all journals and thrust loads. Protection plates prevent oil escaping and dust and syrup from entering the bearing.
TECHNICAL SPECIFICATIONS:
MODEL 12" 18" 30" 36" 42" 48" 60" 72"
Loading capacity in kgs. 8 15 45 80 100 150 210 275
Motot H.P. 0.5 1.0 1.52 1.5 2.0 2.0 5.0 7.5
Blower H.P. 0.33 0.33 0.33 0.33 1.0 1.0 1.5 2
Heater capacity in kw. 1.5 1.5 1.5 1.5 3.0 3.0 3.0 5
Net weight (approx) 200 250 300 350 400 430 630 900
Lenght (mm) 1000 1000 1410 1520 1685 1790 2180 2300
Width (mm) 850 850 1140 1300 1300 1450 1775 2080
Height (mm) 1000 1000 1755 1755 1825 1915 1700 1865
Variable pulley system up to 48" size to change the RPM of pan. Fix pulley system in 60" and above.
SPECIAL FEATURES:VERY MUCH Suitable for sugar and film coating
Note: Specifications of the machineries are subject to change without any prior notice.