| |
MODEL NO.: CPRMG |
| |
"PRECIOUS" RAPID MIXER GRANULATOR |
| |
 |
| |
TECHNICAL SPECIFICATION: |
| |
|
Model |
Working Volume |
Gear Box Ratio |
Main Motor HP
(1500/750 RPM) |
Chopper Motor HP(1500/3000
RPM) |
Discharge ht. |
|
|
Ltrs |
Kgs |
|
|
|
|
|
RMG 25 |
25 |
5-7.5 |
4” |
3/5 |
1.5/2 |
600 |
|
RMG 50 |
50 |
25 |
4” |
3/5 |
1.5/2 |
600 |
|
RMG 100 |
80 |
40 |
7.5:1 |
7.5/10 |
2/3 |
700 |
|
RMG 150 |
120 |
60 |
7.5:1 |
10/15 |
3/5 |
780 |
|
RMG 250 |
200 |
100 |
10:1 |
22.5/30 |
3/5 |
1055 |
|
RMG 300 |
240 |
120 |
10:1 |
22.7/30 |
3/5 |
1200 |
|
RMG 400 |
320 |
160 |
10:1 |
35/40 |
5/7.5 |
1200 |
|
RMG 600 |
480 |
240 |
10:1 |
40/50 |
5/7.5 |
1200 |
|
RMG 800 |
640 |
320 |
15:1 |
50/60 |
5/7.5 |
1200 |
|
RMG 1000 |
800 |
400 |
15:1 |
63/85 |
10/15 |
1200 |
|
RMG 1200 |
1000 |
500 |
15:1 |
80/100 |
10/15 |
1200 |
|
| |
|
| |
OPERATION |
|
|
| |
Cylindrical mid portion and conical top portion for efficient mixing operation & provided with counter balanced lid. Lid provided with vents, view ports & charging openings. |
|
| |
The impeller is designed to provide mixing at the bottom and at the centre of the bowl and is driven through a specially designed bearing housing that facilities inside wash facility for quick change over and also prevents leakage of powder from bottom entry and leads to longer life of gear box. |
|
| |
The discharge port is mounted horizontally into the bowl with vertical downward opening. The opening is operated by pneumatic cylinder and discharged can be regulated for required opening. |
| |
|
| |
SPECIAL FEATURES: |
| |
|
Air purged shaft seals eliminating powder entering the seal.
Built in cleaning system for both shaft seals.
Layouts to suit individual requirements possible.
Machine can be provided with loading & unloading units to form an assembly line & reduce material handling (Optional feature)Machine can be provided with loading & unloading units to form an assembly line & reduce material handling (Optional feature)
Fanner taper lock pulley on main drive to reduce vibration and better transmission efficiency.
Main Bearing Housing provided with 3 nos Oil Seals and sleeve to minimize powder leakages / cross contamination.
Main panel provided with pressure switch control for proper functioning of the machine at desired pressure of air only to prevent powder entry into impeller and eliminates jamming of impellers.
Circuit provided with interlock contactors so that chopper cannot operate directly, independently.
Discharge plunger provided with 3 position solenoid valves to open and close at desired levels, thereby regulating the discharge and preventing discharge of large lumps.
Pneumatic circuit provided with non return valve and water inlet./ outlet connections for facilitate washing of the main impeller assembly withou dismantling, to facilitate faster change over.
|
|