| |
|
"Precious" Roll
Compactor.
|
Precious
Roll Compactor is designed for the densification by
compacting powder for the Pharmaceutical & Bulk
Drug Industries in particular, Food & Chemical industries
in general. Precious Roll Compactors are designed specially
for continuous processing of a wide variety of materials.
By virtue of its construction and design, it ensures
easy and quick clean up required for frequent product
changeover |
| |
SALIENT
FEATURES: |
|
To improve bulk density |
|
To achieve better granulation
of sieve analysis. |
| |
To reduce process cost and
improve product quality. |
A
double output shaft gearbox, with step pulley drive
and the necessary couplings, drives the rolls. The double
output shaft gearbox ensures synchronization of the
rolls and an equal distribution of the torque to the
rolls. Conical predensifier screw is supplied. The screws
are cylindrical at base to enable accurate metering.
The feed screw assembly can be hydraulically lifted
by hand operated hydraulic pump and swung aside. This
facilitates easy access and cleaning of all parts having
contact with the product. Hard chrome plated & mirror
finished compacting rolls are made of Tool steel, hardened
to 55HRc approximately and are keyed into shafts and
protected against axial slipping by stuffing pieces.
Scrapper assembly is designed to dismantle for ease
of cleaning. Locating guide at bottom of the hopper
is provided for easy assembly.
All parts of the
compacting head and feeding device in contact with the
product are made from corrosion resistant steel or protected
by chrome plating to avoid contamination of product.
The gaps on both sides of the rolls are sealed by stuffing
pieces to prevent leakage and loss of pressure in the
product. Hard chrome plated stuffing pieces are made
of hardened steel to resist wear. Pre-compaction chamber
guides the product to rolls without any slippage or
leakage. Electrical interlocking between main roll drive
and feed screw drive.
|
|
TECHNICAL SPECIFICATIONS:
|
| Models |
CPRC
– 200/50 |
CPRC
– 200/75 |
CPRC
– 200/100 |
CPRC
– 200/150 |
| Output |
20 to 60, kg/hr |
75 to 100kg/hr |
100 to 250 kg/hr. |
100 to 350kg/hr |
| Roll Size. |
200 mm to Dia x 50 mm (W) |
200 mm Dia x 75 mm (W) |
200 mm Dia x 100 mm (W) |
200 mm dia x 150 mm (W) |
Roll Speed,
(Step pulley Drive) |
5 to 25 RPM |
5 to 25 RPM |
5 to 25 RPM |
5 to 25 RPM |
| Roll Drive Motor |
5 HP, 960 RPM, 440 V, 3 phase,
50 Hz, |
5 HP, 960 RPM, 440 V, 3 phase,
50 Hz, |
5 HP, 960 RPM, 440 V, 3 phase,
50 Hz, |
5 HP, 960 RPM, 440 V, 3 phase,
50 Hz, |
| Feed screw drive motor |
2 HP, 1440 RPM, 440 V, 3
Phase, 50 Hz |
2 HP, 1440 RPM, 440 V, 3
Phase, 50 Hz |
2 HP, 1440 RPM, 440 V, 3
Phase, 50 Hz |
2 HP, 1440 RPM, 440 V, 3
Phase, 50 Hz |
| Net weight |
1000 kgs |
1200 kgs |
1500 kgs |
3000 kgs, |
|
|
|
